Preventing earthquake damage with carbon fiber reinforcement

If you are concerned about an earthquake, any building can benefit from reinforcement. Both carbon fiber and glass reinforcement systems are cost-effective solutions that can exceed seismic requirements.

Preventing earthquake damage with carbon fiber reinforcement

Earthquakes are particularly harmful to buildings, as ground vibrations can cause movement in directions that are difficult to predict and defend against. The magnitude and duration of the earthquake are factors that cause damage. The longer and stronger the earthquake lasts, the greater the chance that it will usually be damaged. The type of soil beneath the building can also be a damaging factor. If the soil is thicker, softer or wetter, the vibration will increase. Generally, high-rise buildings are more affected by slow vibrations, while smaller buildings are more affected by short-term and frequent vibrations. Updates to seismic codes to increase compressive and tensile strength. The building is then upgraded and reinforced to ensure compliance.


Seismic upgrades include: traditional steel and concrete reinforcement to strengthen steel beams, widen concrete columns, and increase in-plane and out-of-plane strength of wall panels. Horse's unidirectional carbon fiber reinforced materials are a lower cost solution that adds almost no weight to the building.

Preventing earthquake damage with carbon fiber reinforcement

Carbon fiber reinforcement can enhance the rigidity of buildings. During an earthquake, it can make buildings exist for dozens of seconds, saving more lives.


Horse Construction Mission

Producing the highest quality structural strengthening materials, improve structural performance, increase safety level, and extend service life of existing structures.

CFRP SYSTEM

Customers who use Horse's carbon fiber products for repairs can save an average of 50% compared to replacement or other repair solutions.


Horse Construction Recommended Products

You can find anything here you are in need of, have a trust trying on these products, you will find the big difference after that.

HM-20 Unidirectional Carbon Fiber Wrap

High strength, unidirectional carbon fiber wrap pre-saturated to form a carbon fiber reinforced polymer (CFRP) wrap used to strengthen structural concrete elements.

See more >

HM-180C3P Carbon Fiber Adhesive

Good impregnation carbon fiber adhesive for applying carbon fiber reinforced polymer(CFRP) wrap for structural strengthening

See more >

HM-1.2T Unidirectional Carbon Fiber Strip

High strength carbon fiber reinforced polymer (CFRP) strip / laminate / plate for structural strengthening and concrete repair

See more >

Back
Top
Close